Product range
Coils are the most economical form of flat steel for high-volume users: pipe and tube mills, roll formers producing purlins, decking and roofing, and manufacturers of panels, appliances and enclosures.
We take enquiries for master coils and slit coils, matched to your line's coil weight, inner diameter and width requirements. Specify grade, thickness, width, coating and monthly volume so supply can be planned rather than bought spot.
Specifications
Ranges below reflect what is commonly traded in the Saudi market. Exact sizes, grades and stock availability are confirmed at quotation.
| Thickness | HRC ≈ 1.5 – 16 mm · CRC ≈ 0.3 – 3 mm · GI/PPGI ≈ 0.25 – 3 mm |
|---|---|
| Width | Commonly 1000 – 1500 mm master coils; slit widths to order |
| Coil ID | 508 mm or 610 mm (confirm with your decoiler) |
| Coil weight | Typically 3 – 25 t master coils; smaller on request |
| Coatings | Zinc Z60–Z275; AZ100–AZ150; paint systems e.g. polyester, SMP, PVDF |
Selection guidance
Inner diameter, maximum coil weight and maximum outer diameter must match your decoiler and handling equipment.
Polyester suits mild exposure; silicon-modified polyester (SMP) and PVDF offer better UV and colour retention for hot climates.
For precision forming, agree flatness tolerance and mill edge vs. trimmed edge in advance.
Mill test certificate per coil · Coil tag with heat number and weight · Coating/paint certificate
Sheets, Coils & Plates
How to buy steel coils: HRC, CRC, GI, GL and PPGI, coil ID and weight, width, grade, coating, paint system, tolerances, packaging, certificates and supply planning.
6 November 2026 · 3 min read
Sheets, Coils & Plates
How coil slitting and cut-to-length lines work, achievable tolerances, burr and edge quality, multiple-width set-ups, scrap, and when buying processed steel saves money.
6 November 2026 · 3 min read
Sheets, Coils & Plates
What zinc coating designations like Z120, Z180 and Z275 mean, how coating mass affects corrosion life, and which to choose for Saudi coastal, industrial and inland conditions.
6 November 2026 · 3 min read
Request a quotation
Share drawings, a BOQ or a simple list. We will confirm availability, lead time and documentation before you commit.