product center
1045 steel yield strength psi

1045 steel yield strength psi

Outside diameter:10.3mm-3500mm

Wall Thickness:1mm-60mm

Application:1045 steel yield strength psi we supplied are used for mechanical industry,pipeline,thermal equipment,petroleum drilling,chemical industry,agricultural irrigation and urban construction.

Tel:0086-021-61182423

Email: [email protected]

Product details:

AISI 1045 Medium Carbon Steel - AZoM

AISI 1045 steel is a medium tensile steel supplied in the black hot rolled or normalized condition. It has a tensile strength of 570 - 700 MPa and Brinell hardness ranging between 170 and 210. AISI 1045 steel is characterized by good weldability, good machinability, and high strength and impact ...

1018 vs. 1045 Steel Comparison | Capital Steel & Wire

1018 vs. 1045 Steel Comparison. Carbon steel is one of the most widely used materials in the world, and the 1018 and 1045 grades of steel is a big reason for that. One of the most common questions that arise when considering buying cold finished steel products is the difference between 1018 cold steel bars and 1045 cold bars. ... Yield Strength ...1045 Cold Drawn · 1045 Hot Rolled

AISI 1045 Steel, cold drawn, high temperature stress ...

AISI 1045 Steel, cold drawn, high temperature stress relieved, 50-75 mm (2-3 in) round Categories: Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Medium Carbon Steel. Material Notes:[PDF]

1045 MEDIUM TENSILE CARBON STEEL BAR - …

1045 medium tensile carbon steel bar 1045 is a medium tensile low hardenability carbon steel generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 - 700 Mpa and Brinell hardness range 170 - 210 in either

1045 Cold Drawn Steel Bar Stock | Capital Steel & Wire

Capital Steel & Wire is a distributor of cold drawn 1045 steel bar. 1045 is a medium tensile carbon steel. It has higher strength and impact properties than lower carbon steel, good weldability and good machinability. 1045 has many common applications that require more wear resistance and strength that 1018 and 1035 cannot provide. Typical applications of 1045 can include chain pins, gears ...

1045 Medium Tensile Carbon Steel Bar | Interlloy ...

1045 is a medium tensile low hardenability carbon steel generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 - 700 Mpa and Brinell hardness range 170 - 210 in either condition.Characterised by fairly good strength and impact properties, plus good machinability and reasonable weldability in the hot rolled or normalised ...

Hot Rolled Steel C1045 | Metal Supermarkets - Steel ...

Hot Rolled Steel C1045 Grade Summary: Medium carbon steels suitable for machining, forging, heat treating, cold drawing, etc. When heat treated, 1045 provides greater strength than can be obtained from lower carbon steels.[PDF]

MEDIUM TENSILE STEEL AISI 1045 - S&T Stainless

MEDIUM TENSILE STEEL – AISI 1045 AISI 1045 Medium Carbon, Medium Tensile Steel, supplied black as rolled, black as forged or normalised and bright drawn or smooth turned, offering good strength, toughness and ... Yield Strength MPa Tensile Strength MPa Elongation % Impact Izod J[PDF]

Mechanical Properties of Steel - pivotpins

GENERAL INFORMATION Mechanical Properties of Steel - Condition, Strength, Hardness, Machinability Stainless Steels. AISI. Type 302 HQ Type 303. Type 304 Type 316. Type 410 Type 416. Type 17-4 Materials. Condition

1045 | Alro Steel

Alro stocks 1045 Steel - a medium carbon steel used extensively in induction hardening applications. 1045 is not normally considered a screw machine steel and is only fair for brazing and welding. However, it can be forged satisfactorily and is the most common shafting steel in the medium carbon range.

AISI 1045 Carbon Steel (UNS G10450) - AZoM

AISI 1045 is a medium carbon steel designed to be able to function in areas requiring greater strength and hardness. Carbon steels are a category of steels with 0.12 to 2% carbon content. About

1045 Steel vs. 1018 Steel | Hunker

Yield strength for 1045 steel is much higher than that of 1018, at 76,900 psi, so if the steel needs to flex and return to its original shape, 1045 steel would be preferred to 1018. The elongation of 1045 steel is 12%, so if you need a piece of steel that would stretch before breaking, 1018 is a better choice than 1045.

1045 Hot Rolled | Alro Steel

C1045 is a work hardening steel. 1045 steel is silicon killed with a higher carbon content for greater strength. Strength can be improved in the lighter and medium thickness by heat treatment. Machinability is good, while forming and welding properites are limited.

1045/50 High Strength S-CPO® - pmtsco

Acralloy® offers the strength and toughness of a quenched and tempered alloy steel; Stressproof® gives high strength with free machining characteristics. ... larger diameters have hot rolled properties, i.e., 50,000 psi approximate yield strength. ** ASTM A311, Class B ... 1045/50 High Strength S-CPO® 1045 H-CPO® ...

Annealed and Cold Drawn 1045 Carbon Steel :: …

Annealed and Cold Drawn 1045 Carbon Steel Annealed and cold drawn SAE-AISI 1045 is SAE-AISI 1045 steel in the annealed and cold-drawn condition. The graph bars on the material properties cards below compare annealed and cold drawn SAE-AISI 1045 to: wrought carbon or non-alloy steels (top), all iron alloys (middle), and the entire database (bottom).

A36 steel - Wikipedia

A36 steel in plates, bars, and shapes with a thickness of less than 8 in (203 mm) has a minimum yield strength of 36,000 psi (250 MPa) and ultimate tensile strength of 58,000–80,000 psi (400–550 MPa).Properties·

1045 Steel Bars & Rods | Clifton Steel

1045 steel round bars are special turned, ground, and polished steel designed for applications calling for a steel superior to cold rolled or hot rolled bars, but at an economical price. 1045 round bars are produced to exacting specifications to assure close tolerances in …

Carbon steel SAE 1045 [SubsTech]

carbon_steel_sae_1045.txt · Last modified: 2012/06/02 by dmitri_kopeliovich Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 …

SAE-AISI 1045 (S45C, G10450) Carbon Steel :: MakeItFrom

SAE-AISI 1045 steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. 1045 is the designation in both the SAE and AISI systems for this material. G10450 is the UNS number.

Cold Rolled Steel C1045 | Metal Supermarkets - Steel ...

Cold Rolled Steel C1045. Grade Description: A medium carbon steel allowing higher strength properties than 1018. A wide range of properties can be obtained. Typical Applications: Shafts, machinery parts, ... Tensile Strength (PSI) 82,000 Yield Point (PSI) 45,000 Elongation*** 16

steel pipe

Shanghai KATALOR Enterprises Co., Ltd is a steel pipe manufacturing factory ,which is specialized in manufacturing seamless steel pipe,SSAW steel pipe,LSAW steel pipe,ERW steel pipe,stainless steel pipe,1045 steel yield strength psi,etc.
we own dozens of advanced production lines and advanced production technology and high quality professional management talents to ensure excellent product quality.

Our aim is to provide you with high quality products and good after-sales service. Welcome to visit us and expecting to work with you and create a brilliant future together!

If you can't find what you wanted ,Please send Email to [email protected] for getting the products information,we will reply you ASAP

Welcome to visit us and expecting to work with you and create a brilliant future together!

Packaging & Delivery of 1045 steel yield strength psi

Packaging Details: Standard export packing or according to customer's request.
Surface Treatment: 1) Bared
2) Galvanized
3) Oiled
4) PE,3PE, FBE, corrosion resistant coating, Anti corrosion coating.
Test: Manufacturer Test Certificate.
Under Third Party Inspection with Excise Gate Pass to avail Modvat benefit.
Additional service: 1) Plain; 2) Beveled; 3) Thread with Coupling or cap; 4) Chamfer; 5) Groove; 6) Screw; 7)Puch holes as per customer's request ,etc.

KATALOR steel

About our steel pipe:

Description:

1) Grade: A283 C, A36, S235JR/J0/J2, S275JR/J0/J2,SS400,ST37-2,A516 Gr.70,A285 Gr.C,16Mo3,P235GH,A387,SM490A,ST52-3,S355,Corten A/B,A588,SPA,A,AH36,EH36,AH32,API 5L

2) Standard: ASTM, JIS, DIN, EN, API, BS AS/NZ

3)Category: seamless steel pipe,SSAW steel pipe,LSAW steel pipe,ERW steel pipe,stainless steel pipe,etc

4) OD: 10mm-3500mm

5) Wall thickness: 1mm-60mm

6) Usage: Conveying fluid and powdery solid, exchanging heat energy, manufacturing machinery parts and containers, building frame, pillar and mechanical support,etc.

Terms:

1) Delivery term: FOB,CNF CIF

2) Delivery lead time: 20 days after receive T/T deposit.

3) Payment term: .30% as deposit by T/T, balance will be paid by T/T against the copy of B/L.

4) Quality assurance: Test Certificate is supplied with shipment, third Party Inspection is acceptable.

If you can't find what you wanted ,Please send Email to [email protected] for getting the products information,we will reply you ASAP

Our Advantage about 1045 steel yield strength psi:

Our service is the "one-stop" work style. We have our processing factory and the pre-treatment factory, can make the customers enjoy cutting,welding,drilling holes,ball blasting, derusting, painting by the lowest cost price.

Good quality and fast delivery time is the base of our work, this is not enough. Our every sales are trying their best to solve every problem from both you and your end user.we are making every client feel our company is their home in china.

KATALOR steel

If you have any questions or need support, please fill in the form below, we will get back to you as soon as possible!!

*
*
 
  @ 2010 - 2018 Shanghai KATALOR Enterprises Co., Ltd.